Bambu Lab Hotend Cooling Fan for H2 – FAF014

Bambu Lab Hotend Cooling Fan for H2 – FAF014

Original Bambu Lab hotend cooling fan for the H2 toolhead (FAF014). This small but key component is located between the TH board and the extruder and ensures stable cooling of the hotend. This prevents heat creep (gradual heating of the filament too high up in the system), premature softening of the material and subsequent nozzle clogging or print interruption.

It is intended as an official spare part for the H2 series and is fully compatible with:

• Bambu Lab H2D and H2D Laser
• Bambu Lab H2S and H2S Laser

If you print long jobs from ASA, ABS, PETG or technical filaments, having a spare hotend fan on hand is practically a necessity – failure of this part means an immediate stop of the print.

Key features

• Original Bambu Lab part (FAF014) – guaranteed compatibility with the H2 toolhead.
• Specifically designed for hotend cooling – located between the TH board and the extruder for efficient airflow around the heat break.
• Prevents nozzle clogging – reduces overheating of the filament in the area above the nozzle and lowers the risk of material jams.
• Essential for stable high‑temperature printing – especially when printing ASA, ABS, PA, filled technical filaments and when using a heated chamber.
• Quiet and compact – low profile, adapted to the limited space in the H2 toolhead.
• Easy integration – supplied as a ready‑to‑install module for mounting into the H2 head.

Package contents

Depending on the compatibility variant (H2D / H2S), the original Bambu Lab package contains:

For H2D / H2D Laser

• 1× Cooling Fan for Hotend – H2
• 2× screw M2.5×8
• 2× screw BT2.6×8

For H2S / H2S Laser

• 1× Cooling Fan for Hotend – H2
• 2× screw BT2×4

Note for H2S: for some SKUs (e.g. FAH047) it is necessary to check the orientation of the fan before tightening – follow the official Bambu Lab manual.

Technical specifications

Why keep a spare hotend fan in stock

• For high‑temperature prints it is a consumable part – during long‑term printing in a hot chamber the fan is exposed to high thermal stress.
• Fan failure = immediate print stop – the controller reports a hotend fan RPM error and the print is interrupted.
• Downtime prevention – having a spare fan in stock is crucial for users who operate the H2 printer professionally or almost continuously.

Installation recommendations

• Before replacement, turn off the printer and disconnect the power supply.
• Follow the official Bambu Lab Wiki guide for disassembling the H2D/H2S toolhead.
• Be careful with flat cables and connectors, work slowly and systematically.
• After installation, check that the fan rotates freely and does not rub anywhere.

This fan is an ideal choice for anyone who wants to maintain maximum reliability and long‑term operation of the Bambu Lab H2 without unnecessary downtime caused by hotend cooling failures.

Key features:

• Original Bambu Lab hotend cooling fan for the H2 series (FAF014)
• Fully compatible with H2D, H2D Laser, H2S and H2S Laser toolheads
• Located between the TH board and the extruder for efficient heat break cooling
• Helps prevent nozzle clogs and errors caused by filament overheating
• Suitable for long‑term and high‑temperature printing in an enclosed chamber
• Lightweight plastic design optimized for the limited space in the H2 head
• Supplied with mounting screws according to the specific H2D/H2S variant
• Ideal as a spare or preventively stocked service part for professional operation