Bambu Lab Motion-Activated Sound and Light Props Kit - 02 - ZC010

Motion-Activated Sound and Light Props Kit - 02 - ZC010

Motion-Activated Sound and Light Props Kit - 02 - ZC010 is a compact electronic kit for sound and light effects, designed for 3D printed props (swords, daggers, light staves, sci‑fi weapons, etc.). Thanks to the integrated accelerometer/IMU sensor, it reacts to movement – swing, strike, power on/off – and triggers light animations and sound effects accordingly.

Main Advantages

• Motion-activated effects – built-in IMU sensor detects movement and triggers the corresponding light and sound.
• Mobile application (Android / iOS) – adjust color, brightness, flashing modes, and volume via Bluetooth.
• Customizable sounds and lights – more than 20 preset light effects and 27 sounds, option to upload your own effects to a TF card.
• Compact design for swords and daggers – Kit 02 (ZC010) version is optimized for narrower props where the user provides their own LED strip (256RGB 5050, approx. 815 mm).
• Easy integration into 3D printed models – available community models (Lightsabers, fantasy swords, gaming weapons) are directly designed for this kit.

What is Motion-Activated Sound and Light Props Kit - 02 - ZC010?

Kit 02 is the Compact Edition of the same series as Kit 01. It does not include aluminum tubes or diffusion foam, but utilizes smaller dimensions and flexibility for custom prop designs. It includes electronics, a speaker, control board, and battery – simply build it all into a 3D printed body and connect the recommended LED strip. The kit is popular in the 3D model creator community: it is often used for light swords, futuristic swords, gaming weapons, and other light props where dynamic light modes and synchronized sound effects are needed.

Functions and Features

• Motion Detection (IMU) Integrated motion sensor (IMU) senses rotation and acceleration. It enables:
  • effects on on / off of the prop,
  • effects on swing, swipe, or rotation,
  • effects on impact / strike.
• Control via App The device communicates with a mobile app via Bluetooth. In the app you can:
  • select preset light modes,
  • change colors, brightness, and flashing speed,
  • set volume, select sound profiles,
  • upload your own sound files and light sequences.
• Sound Effects
  • 27 pre-installed sounds suitable for swords, light weapons, and fantasy props.
  • Support for custom sounds via TF card (microSD) – e.g., sounds from movies, games, or self-recorded effects.
  • Integrated speaker with its own resonator for clearer and louder sound.
• Light Effects
  • More than 20 preset light animations (pulsing, swing, strobe, "charging", hit, etc.).
  • Support for addressable RGB LEDs (recommended type 256RGB 5050 LED strip, length around 815 mm – not included in the package).

Typical Usage

• 3D printed light swords and lightsabers.
• Cosplay fantasy and sci‑fi swords.
• Props for LARP, film, and theater performances.
• Decorative light staves and scepters.
• Gaming and collectible props with interactive lighting.

Package Contents (Kit 02 – ZC010)

• 1× main board (SNV4pro) with built-in TF card (32 GB) and motion sensor.
• 1× control panel (power button, USB‑C connector, ports for LEDs, speaker, and other accessories).
• 1× speaker for sound effect playback.
• 1× 18650 battery (3.7 V, approx. 2600 mAh) with overcharge and discharge protection.
• 2× M3×12 screw for mounting in 3D printed structures.
• 2× M3 brass threaded insert.

Warning: The Kit 02 version does not include the LED strip, aluminum tubes, or diffusion foam. The user provides the LED strip and the mechanical part of the prop themselves.

Technical Parameters

Electronics

• Power supply: Li‑ion 18650, 3.7 V.
• Battery capacity: approx. 2600 mAh.
• Charging: USB‑C, input 5 V / 1 A (does not support fast charging protocols).
• Operating time: approx. 50–60 minutes (depending on selected light and sound effects).
• Charging time: approximately 4–5 hours.
• Memory: built-in TF card 32 GB for sounds and effects.
• Motion sensor: integrated IMU on the main board.
• Interface: connectors for LED strip, speaker, buttons, and power.

Mechanical Dimensions (approximate)

• Speaker: diameter approx. 23.8 mm, height 12 mm.
• Control panel: approx. 41 × 13 × 21 mm.
• Battery: diameter approx. 18.5 mm, length 68.5 mm.
• Main board: approx. 70 × 16 × 6.5 mm.

Compatibility and Integration

• Designed for addressable RGB LED strips 5050 (typically 815 mm, 256 LEDs).
• Functions as a universal sound-light module; it can be built into various 3D printed projects.
• The 3D printing community offers many models on 3D model platforms that are directly designed for this kit – just print the model, insert the electronics, and set the effects in the app.

Who is the Kit Suitable For

• Makers and DIYers who want to bring their 3D printed models to life.
• Cosplayers who need impressive, interactive props.
• Advanced hobby users who are not afraid of simple electronics integration into their own models.

Advantages for Your Project

• You get a ready-made and tuned electronic solution, no need to develop your own firmware or electronics.
• Wide customization options, yet easy control via the app.
• Ideal for projects where you want a professionally-looking combination of light, sound, and motion reaction, but don't want to invest time in developing your own system.

---

Thanks to the Motion-Activated Sound and Light Props Kit - 02 - ZC010, you can turn your 3D printed models into vivid, interactive props with professional light and sound performance, ready for cosplay, exhibitions, and home collections.

Key Features:

• Compact electronic kit for sound and light in 3D printed props
• Motion-activated effects thanks to integrated IMU sensor
• Control and setting of effects via Bluetooth application (Android / iOS)
• More than 20 light and 27 sound effects, option for custom files
• Optimized for swords, daggers, and narrow props – Compact Edition (Kit 02)
• Support for addressable RGB LED strips 5050 (user provides own strip)
• Built-in 32 GB TF card for storing sounds and effects
• Integrated 18650 Li-ion battery with protection, recharging via USB‑C
• Easy integration into 3D printed models and popular cosplay projects