Bambu Lab H2 Series Textured PEI Plate - FAP025
Magnetic print plate for Bambu Lab H2 series (e.g. H2D) with a textured PEI surface and 256 x 256 mm build area. The 0.5 mm flexible stainless steel allows easy removal of models by bending without tools. Heat resistant up to 120 °C and compatible with PLA, PETG, ABS, ASA, TPU, and technical CF/GF filaments.
1 899 Kč
In stock
Product details
- SKU:
- 6937285501356
- Brand:
- Bambu Lab
- Category:
- Náhradní díly a doplňky
Product description
Bambu Lab H2 Series Textured PEI Plate
The Bambu Lab textured PEI plate for the H2 Series is an original build plate designed specifically for Bambu Lab H2 Series (e.g. H2D) printers. The combination of a flexible steel sheet and a textured PEI coating ensures excellent first-layer adhesion while also enabling easy model removal after cooling down.
Main benefits
- Original Bambu Lab accessory for the H2 Series – 100% compatibility with H2 printers (H2D etc.).
- Textured PEI surface – creates a matte, slightly structured bottom surface of models with excellent adhesion.
- Flexible steel sheet – after printing, simply remove the plate from the bed and flex it; the print easily releases without using metal scrapers.
- High thermal resistance – the surface is designed for printing on a heated bed up to approx. 120 °C (H2 Series heatbed temperature).
- Support for a wide range of filaments – PLA, PLA-CF, PETG, PETG-CF, ABS, ASA, PC, PA/PA-CF, PAHT-CF, TPU and other engineering materials (with recommended temperatures and possible use of glue).
- Gold finish – attractive "gold" surface appearance, identical to the original plate supplied with the H2D.
Compatibility
- Printers: Bambu Lab H2 Series (e.g. H2D) – recommended and supported build plate in the H2D user documentation.
- Plate type: Magnetic/flexible build plate of the H2 system, attaches to the printer’s magnetic heated bed.
Note: The textured PEI plate for the H2 Series is not intended for A1 / A1 mini models, which have different dimensions and thickness requirements for the build plate.
Technical parameters
The parameters are based on the official specifications of the Bambu textured PEI plate for the H2 Series (H2D):
| Parameter | Value |
|---|---|
| Plate material | Flexible stainless steel (301SEH) with textured PEI powder coating |
| Steel sheet thickness | approx. 0,5 mm |
| PEI coating thickness | approx. 0,075 mm |
| Usable print area | approx. 256 × 256 mm (H2D build volume) |
| Max. recommended surface temperature | up to approx. 120 °C (heatbed) |
| Surface color | gold, textured |
| Recommended materials | PLA/PLA-CF/PLA-GF, ABS/ASA, PETG/PETG-CF, PET-CF, PA/PA-CF/PAHT-CF, PC/PC-CF, TPU, PVA |
| Recommended heatbed temperatures | e.g. PLA 45–60 °C, PETG 60–80 °C, ABS/ASA 90–100 °C, PA/PC 90–110 °C (depending on material) |
| Cleaning | water + dish soap, or IPA; do not use acetone |
Usage recommendations
- Preparation before printing
- Make sure the plate is properly aligned on the heated bed and firmly held by the magnets.
- Before printing, clean the surface with warm water and a bit of dish soap, then dry with a non-abrasive cloth.
- Temperature settings
- Follow the filament manufacturer’s recommendations and the guidelines for textured PEI surfaces (e.g. above).
- For materials with extreme adhesion (PC, PA-CF), you can use a release layer (glue) for easier removal.
- Print removal
- Wait until the plate has completely cooled down, then remove it and gently flex it – the model will usually release without force.
- Avoid metal scrapers that can damage the PEI surface.
- Maintenance and service life
- If adhesion decreases over time, you can lightly sand the surface with fine sandpaper (e.g. grit 600) to restore adhesion.
- The textured PEI plate is a consumable part; gradual wear of the coating is expected – frequent printing of abrasive materials (e.g. CF) will shorten its lifespan.
Who this plate is suitable for
- Users of Bambu Lab H2 Series who want a second or replacement original textured PEI plate.
- Printers who prefer a matte, textured first surface instead of a smooth glossy one.
- Operators with frequent printing and a requirement for a stable first layer without the need for glue with common materials.
Tips for better results and SEO keywords
When describing or searching for this product, Czech users often use queries such as:
- "Bambu Lab H2 texturovaná PEI podložka"
- "PEI plát H2D"
- "Bambu Lab zlatá PEI deska"
- "podložka pro Bambu H2 series"
By including these phrases in project names, notes, or documentation, you will more easily find guides and settings for this specific plate.
Key features:
- Original textured PEI plate for Bambu Lab H2 Series 3D printers (e.g. H2D)
- Excellent first-layer adhesion for a wide range of filaments including engineering materials
- Flexible stainless steel enables easy print removal by simply bending the sheet
- Textured PEI surface leaves a matte, slightly structured bottom surface on models
- Compatible with high bed temperatures up to around 120 °C
- Easy maintenance – cleaning with water and dish soap, the possibility to restore adhesion by light sanding
- Consumable part designed for long-term use with the original Bambu Lab magnetic system
- Gold color finish matching the design of Bambu Lab H2 printers
