Bambu Lab Dual-Texture PEI Plate for A1 mini
Product details
- SKU:
- 6975337035770
- Brand:
- Bambu Lab
- Category:
- Náhradní díly a doplňky
Product description
Double-sided (smooth + textured) PEI plate for A1 mini
The Bambu Lab Dual-Texture PEI Plate combines two of the most sought-after surface finishes in one sheet – a smooth PEI side for a clean, matte bottom surface and accurate first layer, and a textured PEI side for strong adhesion and a self-release effect after cooling. The A1 mini variant is sized for a usable area of 180 × 180 mm.
Why choose it
- 2-in-1: quickly switch between an aesthetically smooth surface and a highly adhesive textured surface.
- Flexible spring steel makes print removal easy – just gently flex the plate.
- Magnetic attachment holds firmly during printing and helps reduce warping.
Recommended settings (A1 mini)
The values below are based on the manufacturer’s recommendations; adjust other slicer parameters to suit the model and filament.
| Material | Bed temperature | Adhesive – smooth | Adhesive – textured |
|---|---|---|---|
| PLA/PLA-CF/PLA-GF | 45–65 °C | no | no |
| PETG/PETG-CF | 60–80 °C | yes (stick/liquid) | no |
| TPU | 35–45 °C | yes | yes |
| PVA | 45–60 °C | yes | no |
| ABS/ASA/PC/PA | 90–110 °C | see table | see table |
| Note: ABS/ASA/PC/PA are not supported on the A1 mini. |
Care and maintenance
- To restore adhesion, regularly wash the surface with warm water and dish soap; dry thoroughly after washing.
- Do not use acetone – it can damage PEI.
- After printing, let the plate cool (to approximately room temperature) before removing the model.
- The plate is a consumable part; cosmetic wear (scratches, etc.) is not covered by warranty.
Construction and materials
- Textured PEI coating 0.075 mm + smooth PEI sheet 0.125 mm on spring stainless steel.
- Steel plate thickness (A1 mini): 0.4 mm.
- Colors: gold (textured) and dark gray/charcoal (smooth).
- A1 mini packaging: 220 × 190 × 15 mm, weight approx. 0.23 kg.
Tip: For very “sticky” materials (e.g., TPU), use a release layer (glue) even on the textured side to avoid damaging the coating.
Key features:
Two print surfaces in one: smooth + textured PEI
Excellent first-layer adhesion and self-release after cooling
Flexible spring steel for easy print removal
Magnetic attachment, stable printing without plate warping
Optimized for A1 mini: usable area 180 × 180 mm
Recommended temperature table for PLA, PETG, TPU, and PVA
Easy maintenance – wash with soapy water; no acetone
Official Bambu Lab part with code FAP012
