1 / 4
Bambu Lab CyberBrick Time Lapse Hardware Kit for A1 - ZK005
Hardware kit for automatic time-lapse capture on Bambu Lab A1, P1, and X1 series. Includes Multi-Function Core Board and Time-lapse Trigger Shield with Bluetooth, 2.5mm jack shutter, and servo motor support. Enables simultaneous control of up to 4 devices including iOS/Android smartphones and select DSLR/mirrorless cameras.
599 Kč
In stock
Product details
- SKU:
- 6975337039556
- Brand:
- Bambu Lab
- Category:
- Náhradní díly a doplňky
Product description
Designed for A1 and A1 mini.
Bambu Lab CyberBrick Time Lapse Hardware Kit – ZK005 is a hardware kit designed specifically for Bambu Lab 3D printers. It allows you to automatically take photos during printing and turn them into professional-looking time-lapse videos.
After receiving a command from the printer, the kit triggers the camera – allowing you to precisely capture every step of your model’s construction. Thanks to multiple triggering methods, the kit is suitable for both smartphones and mirrorless/DSLR cameras and other cameras.
Warning: 3D-printed case and holder parts shown in the product photos are not included. They can be downloaded and printed according to the official 3D models from Bambu Lab.
Main advantages
- Official Bambu Lab accessory – maximum compatibility with the CyberBrick ecosystem and Bambu Lab printers.
- Multiple shutter triggering methods
- Bluetooth trigger (mobile phone, selected cameras)
- cable trigger via 2.5 mm jack
- mechanical trigger using a servo motor (simulates pressing the camera button)
- Automatic triggering from the printer – the printer sends a command at defined moments (e.g. after each layer), and the kit triggers the shot.
- Support for multiple devices at once – can simultaneously control up to 4 devices (e.g. phone + camera via cable + camera via servo + another device via Bluetooth).
- Preloaded firmware – the Multi‑Function Core Board comes with the necessary firmware, just assemble, connect to the printer and pair with the camera.
- Wide Bluetooth compatibility – support for modern phones (Android, iOS, HarmonyOS) and selected Sony, Canon, Nikon cameras.
- Open 3D models and documentation – official models of the case and mounts, guides and wiki for easy assembly and setup.
Functions and use
How it works
- Assemble the kit – insert the Multi‑Function Core Board into the Time‑lapse Trigger Shield board.
- Connect to the printer – connect the shield to the printer via the Bambu Bus cable (4-pin or 6-pin depending on the printer / AMS type).
- Pair with the camera – according to the official Bambu Lab manual, pair the device via Bluetooth, or connect a cable trigger or servo to the camera.
- Set up timelapse in Bambu Studio / on the printer – enable time-lapse mode (e.g. “Smooth timelapse”).
- Automatic shooting – during printing, the printer sends commands, the kit triggers the camera, and you can easily compile the photos into a video.
Typical use cases
- creation of product videos from 3D printing (for e-shops, customer presentations),
- marketing and social media – attractive videos for YouTube, Instagram, TikTok,
- development documentation and print tuning (monitoring problematic areas layer by layer),
- educational and demonstration purposes in labs, schools and clubs.
Compatibility
Bambu Lab printers
The kit is designed for use within the Bambu Lab / CyberBrick ecosystem (A1, P1, X1, H2 and CyberBrick projects). The specific wiring (4-pin / 6-pin cable, with/without AMS) depends on the printer type and the extension board used.Bluetooth devices
- Mobile phones
- Android: Android 12 and newer
- iOS: iOS 16 and newer
- HarmonyOS: HarmonyOS 4.2.0 and newer
- Selected cameras (reference list)
- Sony: α7C2, α7M4, α7R5, FX30, α6700
- Canon: EOS R7, EOS R6, EOS R50
- Nikon: Z30, Z6II
Safety and firmware
- Updates only with official tools – the CyberBrick Multi‑Function Core Board supports firmware updates only via official Bambu Lab tools. Flashing with unofficial tools may lead to irreversible damage and is not covered by warranty.
- When using the time-lapse shield with the CyberBrick core board, you must follow the official manual for uploading the time-lapse firmware.
- The manufacturer is not responsible for damage to equipment, malfunctions, fire or other damage resulting from failure to follow safety instructions.
Package contents
CyberBrick Time Lapse Hardware Kit – ZK005 includes:- 1× Multi‑Function Core Board
- 1× Time‑lapse Trigger Shield (Time‑lapse Trigger Expansion Board)
- 8× BT2×6 self-tapping screw (Self Tapping Screw)
Note: 3D-printed covers and mounts are not included. 3D models of the cases and mounts are freely available for download and printing.
Technical specifications
| Parameter | Value |
|---|---|
| Manufacturer designation | Bambu Lab CyberBrick Time Lapse Hardware Kit – ZK005 |
| Cat. No. / SKU | B-ZK005, D-BLP-CB-TL (depending on seller) |
| Product type | Electronic kits, accessories for 3D printers |
| Compatibility | Bambu Lab / CyberBrick ecosystem, Bambu Lab 3D printers (A1, P1, X1, H2, depending on wiring) |
| Communication interface | Bambu Bus (4pin / 6pin – depending on the cable used) |
| Interface to printer | 4-pin connector for connection to the printer |
| Interface to AMS | 6-pin connector for connection to AMS (depending on the specific configuration) |
| Interface for camera trigger | 2.5 mm jack for cable shutter release |
| Other interfaces | connector for servo (mechanical shutter press) |
| Controls | multifunction buttons, LED indicators for status, pairing and diagnostics |
| Wireless connectivity | Bluetooth (control of phone / camera) |
| Supported OS (Bluetooth) | Android ≥ 12, iOS ≥ 16, HarmonyOS ≥ 4.2.0 |
| Reference cameras | Sony α7C2/α7M4/α7R5/FX30/α6700; Canon EOS R7/R6/R50; Nikon Z30/Z6II |
| Function | hardware triggering of cameras and phones for 3D print time-lapse |
| Firmware updates | only via official Bambu Lab tools |
| 3D model of case | official CAD/3D files available for download (for self-printing) |
Key benefits for the customer
- Create attractive time-lapse videos of 3D printing without complex manual triggering.
- Full integration into the Bambu Lab and CyberBrick ecosystems.
- Support for various cameras and phones thanks to Bluetooth, cable and servo.
- Easy assembly using official case 3D models.
- Ideal choice for content creators, small businesses, schools, clubs and hobby makers.
Key features:
- Original Bambu Lab CyberBrick kit for time-lapse capture of 3D printing
- Support for multiple triggering methods: Bluetooth, cable shutter, mechanical servo
- Automatic camera triggering based on commands from the printer
- Compatible with the Bambu Lab ecosystem (A1, P1, X1, H2, CyberBrick)
- Wide support for modern phones (Android, iOS, HarmonyOS) and selected Sony, Canon, Nikon cameras
- Possibility to control up to 4 devices simultaneously
- Preloaded firmware – quick setup without complex configuration
- Official 3D models of cases and mounts available for download for self-printing
- Ideal for creating marketing and presentation videos of 3D printing
