Double-sided Textured PEI Plate for Bambu Lab H2D H2S

Current delivery has an incorrect QR code!

Double-sided PEI plate for H2D/H2S Bambu Lab textured PEI plate for the H2 series (H2D/H2S) is designed for a reliable first layer and consistent results even for large models. Powder-coated PEI on spring steel provides strong adhesion during printing and easy release after cooling – without the need for auxiliary adhesives (a release layer may be recommended for specific materials).

Why choose it

• Excellent first layer adhesion and stability even on larger areas.
• Spontaneous release after cooling – simply flex the plate slightly and the model will release.
• Durable surface thanks to powder PEI; suitable for frequent heating/cooling.
• Strong magnetic fixation of the plate to the heatbed to suppress print warping.
• Compatibility with Micro Lidar calibration (new FW improves calibration on textured PEI).

Compatibility

• Bambu Lab H2D / H2S (H2 series)
• Usable print area: 350 × 320 mm

Recommended materials and bed temperatures

• PLA, PLA-CF/GF: 45–60 °C
• PETG, PETG-CF: 60–80 °C (for PETG it is recommended to use a thin layer of glue as a separator)
• ABS/ASA: 90–100 °C
• TPU: 35–45 °C (for some TPU a thin release layer is suitable)
• PC/PC-CF: 90–110 °C
• PA/PA-CF/PAHT-CF: 90–110 °C
• PET-CF: 80–100 °C

Note: Settings may require adjustments based on model geometry and specific filament.

Tips for maintenance and long life

• Cleaning: regularly wash with dish soap and water and dry with a non-abrasive cloth; IPA is supplementary. Do not use acetone.
• Handling: to remove the print, let the plate cool down to at least ~35 °C and then flex it slightly.
• Occasional adhesion revival: gentle sanding (grit approx. 600) can restore the surface.

Package contents

• 1× double-sided textured PEI plate for Bambu Lab H2 (350×320 mm)

Warning

• The plate is a consumable part and will wear out over time (cosmetic changes do not affect function).

Key features:

• Original plate for Bambu Lab H2D/H2S with a larger format of 350×320 mm
• Strong first layer adhesion and stability even for large models
• Easy print release after cooling – without damaging the bottom layer
• Durable powder PEI surface for long-term use
• Magnetic plate fixation minimizes deformation and lifting of corners
• Wide material compatibility including engineering materials (ABS, PC, PA-CF)
• Improved compatibility with automatic calibration (Micro Lidar)
• Simple maintenance – regular washing with dish soap and water is enough