Double-Sided Effect Printing Plate H1H Light Beam + Phantom (for Bambu Lab X1 / X1-Carbon / P1P)

Why this plate

The double-sided H1H plate combines two distinct surface textures: Light Beam creates striking iridescent "rainbow" stripes on the first layer, while Phantom transfers a subtle holographic pattern with shifting gloss. The effect is perfect for decorative parts, labels, packaging, or gift items.

Key benefits in practice

• Two effects in one: Light Beam + Phantom for maximum visual variability.
• Excellent first layer adhesion – according to the manufacturer, better than smooth PEI/PET/PEO; often no glue is required.
• Easy maintenance: effects may temporarily "fade" due to finger grease; they intensify again after washing with warm water and detergent.
• Compatibility with Bambu Lab X1/X1-Carbon/X1E and P1P/P1S/A1 (257×257 mm).

Bambu Lab setting tips

• For X1 series printers, disable "Enable detection of build plate position" in the menu, otherwise adhesion may be impaired.
• Effect surfaces can interfere with LIDAR calibration – perform calibration with a regular plate or skip it.
• Recommended bed temperatures (approximate): PLA 60–65 °C, TPU 35–45 °C; in Bambu Studio select plate type Smooth PEI/High Temp. Further adjust settings according to the filament and part shape.

How the holographic effect works

The surfaces use a fine "diffraction" structure. The extruded plastic fills the microscopic grooves and the resulting pattern refracts light into a rainbow – which is why the effect is most visible at the correct light incidence and viewing angle.

Recommendations for use and maintenance

• If you want the effect to transfer directly to the model and last, do not use glue (glue stick) – the pattern would form in the glue and disappear after washing.
• Keep the surface clean, wash with warm water and a small amount of detergent, avoid touching with greasy fingers.

What's in the box

• 1× spring steel plate 257×257 mm with double-sided surface H1H Light Beam + Phantom.

Note: The plate is intended for a magnetic bed compatible with Bambu Lab. The effect is most prominent with silk/glossy PLA materials; it may be subtler with other materials.

Key features:

• Two attractive textures in one plate: Light Beam and Phantom for an instant visual effect.
• Excellent first layer adhesion, often without glue; easy release after cooling.
• Cleanliness = stronger effect: just wash with warm water and detergent and let dry.
• Compatible with Bambu Lab X1/X1-Carbon/X1E and P1P/P1S/A1 (257×257 mm).
• Safe settings: on X1, disable plate position detection; perform LIDAR calibration on a regular plate.
• The holographic effect is created by the fine diffraction structure of the surface.